Zynq™ Evaluation and Development 原理图PCB
The features provided by the MicroZed consist of:
•Xilinx Zynq 7010/7020 CLG400 AP SOC
oPrimary configuration = QSPI Flash
oAuxiliary configuration options
JTAG (through PL via Xilinx PC4 Header)
microSD Card
•Memory
o1 GB DDR3 (x32)
o128 Mb QSPI Flash
o4 GB microSD Card (Evaluation Kit only, AES-Z7MB-7Z010-G)
•Interfaces
oXilinx PC4 Header for programming
Accesses Programmable Logic (PL) JTAG
Processing System (PS) JTAG pins connected through Digilent Pmod™
compatible interface
o10/100/1000 Ethernet
oUSB Host 2.0
omicroSD Card
oUSB 2.0 Full-Speed USB-UART bridge
oOne Digilent Pmod compatible interface, connected to PS MIO
oTwo 100-pin MicroHeaders
oReset Button
o1 User Push Button
o1 User LEDs
oDONE LED
•On-board Oscillator
o33.333 MHz
•Power
oHigh-efficiency regulators for Vccint, Vccpint, Vccbram, Vccaux, Vccpaux, Vccpll,
Vcco_0, Vcco_ddr, Vcco_mio
oThree potential powering methods
USB Bus Power from USB-UART interface
Optional barrel jack and AC/DC supply
Optional carrier card 学习学习 学习学习 好芯片啊,就是能玩转的人少啊,ARM linux fpga 和硬件 缺一不可。。 好东西,谢谢了。。 学习学习!!! 谢谢分享
页:
[1]
2