AT指令控制SIM868模块实现GPRS上网功能

oushi · 发表于 2018-1-28 23:08:21

马上注册，结交更多好友，享用更多功能，让你轻松玩转社区

您需要登录才可以下载或查看，没有账号？立即注册

×

本文转载于欧时电子
分享一下AT指令控制SIM868模块实现往服务器上传数据：
发送：AT+CIPSTART="TCP","xxx.xxx.xxx","N"\r\n
返回：OK
这里的xxx.xxx.xxx代表要连接的服务器地址
N代表服务器端的TCP端口号
发送：AT+CIPSTATUS\r\n
返回：CONNECT OK
发送：AT+CIPSTATUS\r\n
返回：>
发送：Hello
返回：Hello
发送：0x1A
返回：SEND OK
发送：AT+CIPCLOSE\r\n
返回：CLOSE OK
发送：AT+CIPSHUT\r\n
返回：SHUT OK
代码实现如下：

uint8_t sendCommand(char *Command, char *Response, unsigned long Timeout, unsigned char Retry)
{
uint8_t i;
uint16_t Time_Cont = 0;

USART1_CLR_Buf();
for(i = 0; i < Retry; i++){
  UART1_SendStr((u8 *)Command);
  Time_Cont = 0;
  while (Time_Cont < Timeout){
delay_ms(100);
Time_Cont += 100;
if (strstr((char *)USART1_RX_BUF, Response) != NULL){
USART1_CLR_Buf();
return Success;
}
  }
  USART1_CLR_Buf();
}
USART1_CLR_Buf();
return Failure;
}

void GPRS_support_Initialization(void)
{
if(sendCommand("AT\r\n", "OK\r\n", 3000, 10) == Success){
  asm("nop");
  asm("nop");
}else{
  errorLog();
}
delay_ms(100);
if(sendCommand("AT+CGCLASS=\"B\"\r\n", "OK\r\n", 3000, 10) == Success){
  asm("nop");
  asm("nop");
}else{
  errorLog();
}
delay_ms(100);
//  TCP/IP协议 net 接入点
if(sendCommand("AT+CGDCONT=1,\"IP\",\"CMNET\"\r\n", "OK", 3000, 2) == Success){
  asm("nop");
  asm("nop");
}else{
  errorLog();
}
delay_ms(100);
if(sendCommand("AT+CGATT=1\r\n", "OK\r\n", 3000, 10) == Success){
  asm("nop");
  asm("nop");
}else{
  errorLog();
}
delay_ms(100);

}
void connect_TCP_server_by_GPRS(void)
{
char sendCom[2] = {0x1A};
// if(sendCommand("AT+CGACT=1,1\r\n", "OK\r\n", 3000, 10) == Success){
//  asm("nop");
//  asm("nop");
// }else{
//  errorLog();
// }
// delay_ms(100);
if(sendCommand("AT+CIPSTART=\"TCP\",\"xxx.xx.xx\",\"N\"\r\n", "OK\r\n", 3000, 10) == Success){
  asm("nop");
  asm("nop");
}else{
  errorLog();
}
delay_ms(100);
if(sendCommand("AT+CIPSTATUS\r\n", "CONNECT OK", 3000, 20) == Success){
asm("nop");
asm("nop");
}else{
  errorLog();
}
delay_ms(100);

if(sendCommand("AT+CIPSEND\r\n", ">", 3000, 10) == Success){
  asm("nop");
  asm("nop");
}else{
  errorLog();
}
delay_ms(100);
if(sendCommand("Hello\r\n", "Hello", 3000, 10) == Success){
  asm("nop");
  asm("nop");
}else{
  errorLog();
}
delay_ms(100);
if(sendCommand(sendCom, "SEND OK", 3000, 10) == Success){
  asm("nop");
  asm("nop");
}else{
  errorLog();
}
delay_ms(100);
if(sendCommand("AT+CIPCLOSE\r\n", "CLOSE OK", 3000, 10) == Success){
  asm("nop");
  asm("nop");
}else{
  errorLog();
}
delay_ms(100);
if(sendCommand("AT+CIPSHUT\r\n", "SHUT OK", 3000, 10) == Success){
  asm("nop");
  asm("nop");
}else{
  errorLog();
}
delay_ms(100);
}