|
|
求助，Allegro 导出 GERBER 时候出现错误，不能输出TOP，BOT铜皮，大家遇到过吗，怎么解决这样问题？
出现一个错误提示： FLASH SYM 0 180.000 NO DARK (undefined)
这里的FLASH SYM 没有定义
软件提示信息如下
=====================================================================================================
Results from parameter file ...
DEVICE-TYPE GERBER_RS274X
OUTPUT-UNITS INCHES
FILM-SIZE 2400000 1600000
FORMAT 3.5
ABORT-ON-ERROR NO
SCALE 1
SUPPRESS-LEAD-ZEROES YES
SUPPRESS-TRAIL-ZEROES NO
SUPPRESS-EQUAL YES
UNDEF-APT-CONT NO
===============================================================
PROCESSING FILM < TOP >
TO FILE < D:/Helios_2018/Heliso_JinAo/01_DW_M_RevA01/AD9371-001A_0715_AM_01/gerber/TOP.art > ...
================================================================
FILM PARAMETERS :
---------------------------------------------------------
Undefined line width 0.000
Mirror code NONE
Rotate angle NONE
Offset x: 0.000
Offset y: 0.000
Plot negative NO
Suppress unconnected internal pads NO
Draw holes only NO
APERTURES USED:
---------------------------------------------------------
TYPE SIZE/NAME ROT MIRROR MODE
---------------------------------------------------------
SQUARE 0.13000 0.000 NO DARK
RECTANGLE 0.00984 x 0.01575 90.000 NO DARK
RECTANGLE 0.24213 x 0.24213 90.000 NO DARK
OBLONG 0.03400 x 0.01100 0.000 NO DARK
FLASH SYM 0 0.000 NO DARK
FLASH SYM 0 90.000 NO DARK
FLASH SYM 0 180.000 NO DARK (undefined)
FLASH SYM 0 270.000 NO DARK
PAD SHAPE R040X044-SHAPE 0.000 NO DARK
PAD SHAPE R040X065-SHAPE 0.000 NO DARK
ERROR: aborting film - Undefined aperture symbol, cannot continue.
See APERTURES USED table in this file for symbols to provide.
Error in TOP--halting output. Artwork file not generated.
*** ERROR with TOP
------------------------------------------------------
SUMMARY:
*** ERROR with TOP
ARTWORK Error
ARTWORK Error
=================================================================== |
|
微信公众号
添加方式：
发表于 2018-7-15 13:38:21
