UDOO i.MX6Q 开源模块

ymz000 · 发表于 2018-7-21 16:50:32

马上注册，结交更多好友，享用更多功能，让你轻松玩转社区

您需要登录才可以下载或查看，没有账号？立即注册

×

UDOO i.MX6Q 开源模块是基于NXPi.MX6系列双核及四核系列的单板计算机平台：

[li]>CPU NXP i.MX 6 ARM Cortex-A9 Quad core 1GHz[/li][li]>GPU Vivante GC 2000 + Vivante GC 355 + Vivante GC 320[/li][li]>Integrated accelerators for 2D, OpenGL® ES2.0 3D and OpenVG™[/li][li]>Atmel SAM3X8E ARM Cortex-M3 CPU (same as Arduino Due)[/li][li]>RAM DDR3 1GB[/li][li]>76 fully available GPIO: 62 digital + 14 digital/analog[/li][li]>Arduino-compatible R3 1.0 pinout[/li][li]>HDMI and LVDS + Touch[/li][li]>2 Micro USB (1 OTG type a+b)[/li][li]>2 USB type A (x2) and 1 USB connector (requires a specific wire)[/li][li]>Analog Audio and Mic[/li][li]>CSI Camera Connection[/li][li]>on board Micro SD card reader (boot device)[/li][li]>Input Voltage (recommended) 6-15 V[/li][li]>Ethernet RJ45 (10/100/1000 MBit)[/li][li]>WiFi Module[/li][li]>SATA[/li]

实物

G0975D14_C.rar (1.29 MB, 下载次数: 4)

UDOO_REV_D_schematics.pdf (555 KB, 下载次数: 0)

UDOO_QUADDUAL_BOM.rar (12 KB, 下载次数: 4)

UDOO_Dual_3D_2D_models_rev1.1.zip (35.89 MB, 下载次数: 1)

UDOO_Quad_3D_2D_models_rev1.1.zip (36.03 MB, 下载次数: 4)

udoo_bottom_rev_d.pdf (64 KB, 下载次数: 0)

UDOO_pinout_alternate_table.pdf (1.36 MB, 下载次数: 0)

Udoo_pinout_diagram.pdf (1.36 MB, 下载次数: 0)

udoo_top_rev_d.pdf (102 KB, 下载次数: 0)