使用MT6205的定制PCB

pcbfriend · 发表于 2019-11-18 06:59:10

马上注册，结交更多好友，享用更多功能，让你轻松玩转社区

您需要登录才可以下载或查看，没有账号？立即注册

×

Dear great community,
I am currently trying to design a custom PCB based on the Mediatek MT6205B GSM processor.
I have chosen SRAM and Flash modules. I almost completed the schematic.
But there is a bit of firmware development that I am not satisfied with: the MT6205B has a "factory programming" section in the data sheet. It describes how to load the bootloader into the MT6205B via UART1 - but does not describe the format that the binary must be used (for example, if there is some sort of header).
Therefore, due to this uncertainty, I would like to ask if anyone here knows about the MT6205B boot process.

Best blessing