AD原理图导出网络表导入pads出错

乔巴

老大：
我自己画的AD原理图，导出网络表后，然后用layout导入的时候报错，错误内容如下：

Part name already used Y1
Y1     T-12M
Part name already used Y2
Y2     T-12M
*Not valid pin name for part type D21.1
C15.1 D21.1 P5.3 U1.7
*Bad *CONNECTION* ascii data format, nets must contain more than one pin. Signal RESET
*Not valid pin name for part type Q8.2
Q8.2 R35.2 U1.13
*Bad *CONNECTION* ascii data format, nets must contain more than one pin. Signal PWM4
*Not valid pin name for part type Q6.2
Q6.2 R33.2 U1.12
*Bad *CONNECTION* ascii data format, nets must contain more than one pin. Signal PWM3
*Not valid pin name for part type Q7.2
Q7.2 R34.2 U1.11
*Bad *CONNECTION* ascii data format, nets must contain more than one pin. Signal PWM2
*Not valid pin name for part type Q5.2
Q5.2 R32.2 U1.10

下图为D21的part属性：



file:///C:\Users\shaosheng\AppData\Roaming\Tencent\Users\287126479\QQ\WinTemp\RichOle\]}3(FW4RK_OACZ0)K2~F]_7.png

dizangwang

老吴

看这些网络是不是空的，单段的